MOORE AUTOMATION LIMITED
MOORE AUTOMATION LIMITED COVID-19 - Moore Automationare still working and able to shipping worldwide Best Price , Fast Shipping , New Products , Good Reputation !
Add to Cart
MVI56-DFCMR PROSOFT DF1 Master/Slave Network Interface Module with Reduced Data Block for ControlLogix
MVI56-DFCMR
When needing additional DF1 ports in your ControlLogix system, the MVI56-DFCM Network Interface Module is the fastest and easiest way to add DF1 Half/Full Duplex Master and Slave capability. This module has two powerful and fully configurable DF1 ports allowing the many SCADA and field devices supporting the DF1 protocol to be integrated into the ControlLogix platform. Devices commonly supporting the protocol include Rockwell Automation PLCs and power monitoring equipment, as well as several other third party devices. Each port is user-configurable to act as a Master or as a slave.
The MVI56-DFCMR (DF1 Communication Module with Reduced Data Block) allows Rockwell Automation ControlLogix I/O compatible processors to interface easily with other DF1 protocol compatible devices. Compatible devices include not only Rockwell Automation PLCs and PACs (which all support the DF1 protocol) but also a wide assortment of devices.
The module has two serial ports supporting the DF1 protocol, with each port user-configurable to act as a master or as a slave. Data transfer between the module and the ControlLogix processor is asynchronous to the DF1 network, with the module's internal database being used to exchange data between the processor and the DF1 network.
The MVI56-DFCMR module is the ideal solution for many applications where DF1 protocol connectivity must be added to a ControlLogix platform. The MVI56-DFCMR module can be found in many industrial sectors and in the following applications:
| Specification | Description |
| Backplane Current Load | 800 mA @ 5.1 VDC |
| 3 mA @ 24 VDC | |
| Operating Temperature | 32° F to 140° F (0° C to 60° C) |
| Storage Temperature | -40° F to 185° F (-40° C to 85° C) |
| Shock | 30 g Operational |
| 50 g non-operational | |
| Vibration | 5 g from 10 to 150 Hz |
| Relative Humidity | 5% to 95% (without condensation) |
| LED Indicators | Module Status |
| Backplane Transfer Status | |
| Application Status | |
| Serial Activity | |
| Debug/Configuration port (CFG) | |
| CFG Port (CFG) | RJ45 (DB-9M with supplied cable) |
| RS-232 only | |
| Application ports (PRT1 & PRT2) | |
| Full hardware handshaking control, providing radio, modem and multi-drop support | |
| Software configurable communication parameters | Baud rate: 110 to 115,200 baud, depending on protocol |
| RS-232, 485 and 422 | |
| Parity: none, odd or even | |
| Data bits: 5, 6, 7, or 8 | |
| Stop bits: 1 or 2 | |
| RTS on/off delay: 0 to 65535 milliseconds | |
| App Ports (P1,P2) (Serial modules) | RJ45 (DB-9M with supplied cable) |
| RS-232 handshaking configurable | |
| 500 V Optical isolation from backplane | |
Payment:T/T 100% in Advance
Lead Time : 3-5 Days
Minimum Order Quantity : 1 Piece
Warranty : 1 Year
| PROSOFT | TRICONEX | Bachman | MX213 |
| PROSOFT | TRICONEX | Bachman | BS206 |
| PROSOFT | TRICONEX | Bachman | CM202 |
| PROSOFT | TRICONEX | Bachman | CNT204 |
| PROSOFT | TRICONEX | Bachman | DI232 |
| PROSOFT | TRICONEX | Bachman | DIO216 |
| PROSOFT | TRICONEX | Bachman | EM203 |
| PROSOFT | TRICONEX | Bachman | FM211 |
| PROSOFT | TRICONEX | Bachman | FS211/N |
| PROSOFT | TRICONEX | Bachman | MPC240 |
| PROSOFT | TRICONEX | Bachman | NT255 |
| PROSOFT | TRICONEX | Bachman | PTAI216 |
| PROSOFT | TRICONEX | Bachman | DIO280 |
| PROSOFT | TRICONEX | Bachman | RS204 |
| PROSOFT | TRICONEX | Bachman | BS207 |
| PROSOFT | MVI71-ADM | Bachman | SEM201 |
| PROSOFT | MVI71-AFC | Bachman | BS204 |
| PROSOFT | MVI94-MCM | Bachman | BS205 |
| PROSOFT | PS69-DPM | EPRO | MMS6110 |
