ADAM-4510S ADAM-4510S-D ADAM Isolate RS-422 RS-485 Repeater

ADAM-4510S ADAM-4510S-D ADAM Isolate RS-422 RS-485 Repeater

Product Details

Most industrial computer systems come with RS232 serial ports as standard. Though widely accepted, RS-232 has limited transmission speed, range and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals. The ADAM-4520/4522 converter lets you take advantage of RS-422 and RS-485 on systems originally equipped with RS-232. It transparently converts RS-232 signals into isolated RS-422 or RS-485 signals. You don't need to change your PC's hardware or your software. The ADAM-4520/4522 lets you easily build an industrial grade, long distance communication system with standard PC hardware. The ADAM-4510/4510S repeater simply amplifies, or boosts, existing RS-485 signals to enable them to cover longer distances. It extends the communication distance by 4000 ft (1200 m) or extends the number of connected nodes by 32.

Specifications

General

Connectors: 2 x plug-in terminal blocks (#14 ~ 22 AWG) (RS-422/485)

Isolation Voltage: 3,000 VDC (ADAM-4510S)

Power Consumption: 1.4 W @ 24 VDC

Serial Communications

Input: RS-485 (2-wire) or RS-422 (4-wire)

Output: RS-485 (2-wire) or RS-422 (4-wire)

Speed Modes (bps): 1,200, 2,400, 4,800, 9,600, 19.2 k, 38.4 k, 57.6 k, 115.2 k, RTS control and

RS-422 (switchable)

Power Input: Unregulated 10 ~ 30 VDC w/ power reversal protection

Environment

Operating Humidity: 5 ~ 95% RH

Operating Temperature: - 10 ~ 70°C (14 ~ 158°F)

Storage Temperature: - 25 ~ 85°C (-13 ~ 185°F)

Moore News

NONFERROUS INDUSTRY
Non-ferrous Industry Capability
The sintering method and the Bayer process are currently the main methods for industrial production of alumina.Most of the alumina produced is produced by Bayer process.The Bayer-sintering hybrid method was first created, which greatly improved the total recovery of alumina.
With the continuous improvement of production technology, some new production methods such as lime Bayer method and beneficiation Bayer method are continuously applied to production.
The integrated process control system is a distributed control system.The system consists of eight process control subsystems (workshop) for raw material grinding, lime digestion, dissolution, sedimentation, seed filtration, evaporation, product filtration, and roasting.Each workshop has an engineering station EWS and 2-3 operator stations OPS.

More Products

Contact Us

miya@mvme.cn(Click)

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng52